Fujitsu Eternus DX600 S3 - Power Distribution Units (2 U); Figure 1.36 Power Distribution Unit for DX500 S3;DX600 S3 (AC200-240 V, 2 U, 12 Outlets); Figure 1.37 Power Distribution Unit for DX500 S3;DX600 S3 (AC200-240 V, 2 U, 16 Outlets)

1.5.2 Power Distribution Units (2U)
2U power distribution units are available in two types: a 12 outlet type and a 16 outlet type.
■
Power distribution unit for DX500 S3/DX600 S3 (AC200-240V, 2U, 12Outlets)
There are 12 outlets.
Figure 1.36 Power distribution unit for DX500 S3/DX600 S3 (AC200-240V, 2U, 12Outlets)
2
1
1.
Main line switch
This turns on and off the power distribution unit.
2. Outlet (OUTPUT)
This is a socket (IEC60320 C13) for outgoing power supply. This socket is used to connect a power cord (AC
output cable).
■
Power distribution unit for DX500 S3/DX600 S3 (AC200-240V, 2U, 16Outlets)
There are 16 outlets.
Figure 1.37 Power distribution unit for DX500 S3/DX600 S3 (AC200-240V, 2U, 16Outlets)
2
1
1.
Main line switch
This turns on and off the power distribution unit.
2. Outlet (OUTPUT)
This is a socket (IEC60320 C13) for outgoing power supply. This socket is used to connect a power cord (AC
output cable).
Chapter 1 Component Name/LED Name
1.5 Power Distribution Units (for Regions Other than EMEA&I)
39
FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Operation Guide (Basic)
Copyright 2014 FUJITSU LIMITED
P3AM-7742-04ENZ0