Fujitsu Eternus DX600 S3 - High-Density Drive Enclosure; Front; Rear; Figure 1.24 High-Density Drive Enclosure

1.3 High-density Drive Enclosure
An operation panel and a Disk Activity Panel (DAP) are installed in the front of the high-density drive enclo-
sure. I/O modules, power supply units, and fan expander modules are installed in the rear.
Drives are installed in the high-density drive enclosure.
1.3.1 Front
This section provides the names of the components in the front of a high-density drive enclosure.
Figure 1.24 High-density Drive Enclosure
123
1.
Operation panel
2. Disk Activity Panel (DAP)
3. Front cover
1.3.2 Rear
This section provides the names of the components in the rear of a high-density drive enclosure.
Figure 1.25 Rear View of a High-density Drive Enclosure
5
1
6
2
3 4
7 8
Chapter 1
Component Name/LED Name
1.3 High-density Drive Enclosure
29
FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Operation Guide (Basic)
Copyright 2014 FUJITSU LIMITED
P3AM-7742-04ENZ0