Fujitsu Eternus DX600 S3 - Figure 1.20 3.5 Drives; Figure 1.21 Drive Slot Numbers (3.5 Type Drive Enclosure); Table 1.8 Status and Meanings of each LED (Drive (2.5; 3.5 Type Drive Enclosure))

● 3.5" Drives
Figure 1.20 shows the 3.5" drive. Figure 1.21 shows the slot number of each 3.5" drive.
Table 1.8 shows the status and meanings of each LED.
Figure 1.20 3.5" Drives
1
2
1.
DRIVE READY LED
2. DRIVE FAULT LED
Figure 1.21 Drive Slot Numbers (3.5" Type Drive Enclosure)
Slot#0
Slot#4
Slot#8
Slot#1
Slot#5
Slot#9
Slot#2
Slot#6
Slot#10
Slot#3
Slot#7
Slot#11
The states of LEDs are listed below.
Table 1.8 Status and Meanings of Each LED (Drive (2.5" / 3.5" Type Drive Enclosure))
LED name
LED status Meanings
DRIVE READY
(green)
The drive is in normal status.
(blinks green)
DRIVE FAULT
(amber)
•
The drive is in error status.
•
In response to commands from ETERNUS CLI, the location of
the drive is identified.
Chapter 1 Component Name/LED Name
1.2 2.5"/3.5" Type Drive Enclosure
26
FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Operation Guide (Basic)
Copyright 2014 FUJITSU LIMITED
P3AM-7742-04ENZ0