Fujitsu Eternus DX600 S3 - Audit Log; Figure 3.2 Event Notification; Figure 3.3 Audit Log

■
Host Sense
When an event occurs in the ETERNUS DX, host senses (sense codes) are sent to the server. For details on
sense codes, refer to "Message List".
Figure 3.2 Event Notification
SNMP managerMail server Syslog server
Remote
support
center
REMCS/AIS Connect
Host sense
Server (host)
syslog
SNMP Trap
E-mail
ETERNUS DX
3.5 Audit Log
By setting audit log, audit trail logs (hereinafter referred to as "audit log") that record performed operations
by using the ETERNUS DX and the system actions that are associated with these operations can be sent to
the Syslog server.
For the procedure on setting audit logs, refer to "Configuration Guide (Basic)". For log information, refer to
"Message List".
Figure 3.3 Audit Log
Syslog serverETERNUS DX
System administrator
Log in
Log out
Change settings
↓
↓
Information such as
the storage system name,
the user/role,
the process time,
the process details,
and the process results
Audit log
Chapter 3
Storage System Monitoring
3.5 Audit Log
53
FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Operation Guide (Basic)
Copyright 2014 FUJITSU LIMITED
P3AM-7742-04ENZ0