Fujitsu Eternus DX600 S3 - Figure 1.31 Fan Expander Module; Table 1.14 Status and Meanings of each LED (Fan Expander Module)

LED name LED status Meanings
IDENTIFY
(blinks blue)
The installation location of the I/O module is identified according
to the instruction that is issued from ETERNUS Web GUI or ETER-
NUS CLI.
FAULT
(amber)
The I/O module is in error status.
■
Fan Expander Module
An Fan Expander Module is a cooling fan module.
Figure 1.31 shows the fan expander module. Table 1.14 shows the status and meanings of each LED.
Figure 1.31 Fan Expander Module
123
1.
READY LED
2. FAULT LED
3. IDENTIFY LED
The LEDs turn on or blink to indicate the statuses that are listed below.
Table 1.14 Status and Meanings of Each LED (Fan Expander Module)
LED name
LED status Meanings
READY
(green)
The fan expander module is in normal status.
FAULT
(amber)
The fan expander module is in error status.
IDENTIFY
(blinks blue)
The installation location of the fan expander module is identified
according to the instruction that is issued from ETERNUS Web GUI
or ETERNUS CLI.
Chapter 1 Component Name/LED Name
1.3 High-density Drive Enclosure
34
FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Operation Guide (Basic)
Copyright 2014 FUJITSU LIMITED
P3AM-7742-04ENZ0