Fujitsu Eternus DX600 S3 - Figure 1.18 2.5 Drives; Figure 1.19 Drive Slot Numbers (2.5 Type Drive Enclosure); Table 1.7 Status and Meanings of each LED (Operation Panel (2.5; 3.5 Type Drive Enclosure))

The LEDs turn on or blink to indicate the statuses that are listed below.
Table 1.7 Status and Meanings of Each LED (Operation Panel (2.5" / 3.5" Type Drive Enclosure))
LED name LED status Meanings
IDENTIFY
(blinks blue)
The installation location of the drive enclosure is identified ac-
cording to the instruction that is issued from ETERNUS Web GUI or
ETERNUS CLI.
FAULT
(amber)
The drive enclosure is in error status.
POWER
(green)
DC power is supplied to the drive enclosure.
■
Drives
● 2.5" Drives
Figure 1.18 shows the 2.5" drive. Figure 1.19 shows the slot number of each 2.5" drive.
Table 1.8 shows the status and meanings of each LED.
Figure 1.18 2.5" Drives
12
1.
DRIVE READY LED
2. DRIVE FAULT LED
Figure 1.19 Drive Slot Numbers (2.5" Type Drive Enclosure)
Slot#8 Slot#9
Slot#10 Slot#11 Slot#12 Slot#13 Slot#14 Slot#15
Slot#0 Slot#1 Slot#2 Slot#3 Slot#4 Slot#5 Slot#6 Slot#7
Slot#16 Slot#17 Slot#18 Slot#19 Slot#20 Slot#21 Slot#22 Slot#23
Chapter 1
Component Name/LED Name
1.2 2.5"/3.5" Type Drive Enclosure
25
FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Operation Guide (Basic)
Copyright 2014 FUJITSU LIMITED
P3AM-7742-04ENZ0