Fujitsu Eternus DX600 S3 - 2.5;3.5 Type Drive Enclosure; Front; Figure 1.14 Front View of a 2.5 Type Drive Enclosure; Figure 1.15 Front View of a 3.5 Type Drive Enclosure

1.2 2.5"/3.5" Type Drive Enclosure
An operation panel and drives are installed in the front of the drive enclosure (2.5"/3.5"). I/O modules and
power supply units are installed in the rear.
1.2.1 Front
This section provides the names of the components in the front of a drive enclosure.
■
2.5" Type
Figure 1.14 Front View of a 2.5" Type Drive Enclosure
1
3 3
2
1.
Operation panel
2. 2.5" drive
3. Flange cover
■
3.5" Type
Figure 1.15 Front View of a 3.5" Type Drive Enclosure
1
3 3
2
1.
Operation panel
2. 3.5" drive
3. Flange cover
Chapter 1 Component Name/LED Name
1.2 2.5"/3.5" Type Drive Enclosure
23
FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Operation Guide (Basic)
Copyright 2014 FUJITSU LIMITED
P3AM-7742-04ENZ0