Fujitsu Eternus DX600 S3 - Rear; Components (Front); Figure 1.16 Rear View of a 2.5 Type; 3.5 Type Drive Enclosure; Figure 1.17 Operation Panel (2.5;3.5 Type Drive Enclosure)

1.2.2 Rear
This section provides the names of the components in the rear of a drive enclosure.
Figure 1.16 Rear View of a 2.5" Type / 3.5" Type Drive Enclosure
12
34
1. I/O module (IOM#0)
2. I/O module (IOM#1)
3. Power supply unit (PSU#0)
4. Power supply unit (PSU#1)
1.2.3 Components (Front)
This section describes the operation panel and the drives in the front of the drive enclosure.
■
Operation Panel
An operation panel has a DE-ID display and LEDs.
Figure 1.17 shows the operation panel. Table 1.7 shows the status and meanings of each LED.
Figure 1.17 Operation Panel (2.5"/3.5" Type Drive Enclosure)
2
1
3
4
1.
DE-ID
The DE-ID (drive enclosure number) of the drive enclosure is displayed.
2. IDENTIFY LED
3. FAULT LED
4. POWER LED
Chapter 1 Component Name/LED Name
1.2 2.5"/3.5" Type Drive Enclosure
24
FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Operation Guide (Basic)
Copyright 2014 FUJITSU LIMITED
P3AM-7742-04ENZ0