Fujitsu Eternus DX600 S3 - Page 64

● LAN Card Replacement
The following procedure explains how to replace the LAN card.
1 Turn off the server where the LAN card is to be replaced.
2 Replace the LAN card.
For details on the replacement procedure, refer to the relevant documentation for the LAN card.
3 After completing the settings, confirm that access from the server is available.
Chapter 7 Troubleshooting
7.1 Check List
64
FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Operation Guide (Basic)
Copyright 2014 FUJITSU LIMITED
P3AM-7742-04ENZ0