Working with the notebook
CD/DVD indicator
CD/DVDindicator
The CD/DVD indicator flashes when a data carrier is inserted. The indicator goes out when
the drive is ready for reading. The indicator lights up when the drive is being accessed.
You may on ly remove the data carrier when the indicator is unlit.
If the CD/DVD indicator does not go out aft er a data carrier has been inserted, b ut
instead continues to flash, this means that the drive cannot access the data carrier.
Either the data ca rrier is damaged or dirty or y ou are using a data
carrier that the drive cannot read.
Inserting or removing a data carrier
InsertingRemoving
The notebook must be switched on.
2
1
► Push the insert/eject button (1).
The drive tray will open.
► Gently pull the drive tray (2) completely out.
► Place the data carrier in the drive tray w ith
the printed side facing upwards.
or
► Remove a data carrier that has
been inserted.
► Push in the drive tray until you
feel it lock into place.
36 Fujitsu Technology Solutions
Downloaded from LpManual.com Manuals
To Next Page
Loading...
Need help?
General