Working with the notebook
Setting up WLAN access
• Requirement: A WLAN must be available and you must have the
corresponding access information.
Information on configuring the WLAN access can be found in the
documentation for your operating syste m.
Access via UMTS
If you ordered an integrated UMTS module with your system, you can enjoy optimum
reception and maximum energy efficiency without awkwa rd cables or antennas. The
optional UMTS module is ready for use straight away.
If you did not order a UMTS module, you can purchase the accessories for UMTS reception
from your retailer or you r Fujitsu Technology Solutions dealer.
You will find information on e stab lish ing the connection with the UMTS network
in the documentation for the hardware used.
Your device can connect with the Internet via UMTS. To do this, use one of
the following types of connection:
• USB dongle:
a USB stick with your mobile phone provider’s SIM card
• a mobile end-device (e.g. mobile phone) w ith Bluetooth connection
• a mobile end-device (e.g. mobile phone) with data cable
Ethernet and LAN
EthernetLAN
The internal network module of your notebook supports Ethernet LAN. Yo u can use it to
establish a c onnection to a local network (LAN = Local Area Network).
2
1
► Connect the network cab le to the LAN
port of the no tebook (1).
► Connect the network cable to your
network connection (2).
Your n
etwork administrator can help you to configure and use the LAN connections.
The n
etwork ca ble is not included in the delivery scope. This type of
cabl
e can be obtained from a specialist dea ler.
Fujitsu Technology Solutions 47
Downloaded from LpManual.com Manuals
To Next Page
Loading...
Need help?
General