Fujitsu IP-9500e - A.4 Preparations for On-site Turn-up

Appendix
IP-9500e
81
A.4 Preparations for On-site
Turn-up
This chapter explains the workflow of on-site turn-up.
Since system configurations of the device are diverse depending on the applications used, this chapter
describes the checking process for only a single device.
A.4
START
準備
環境確認
員数確認
版数確認
外観目視確認
ケーブル接
続
入力電圧確認
電源投入
単体試験
システム試験
ＥＮ
Ｄ
Preparations
Environment check
Visual check of
appearance
Cable connection
check
Input voltage check
Power on
Unit test
System test
END
START