Fujitsu ScanSnap S1300 User Manual

How to Perform a Scan (for Mac OS users)
179
6. Press the [Scan] button on the ScanSnap.
D Scanning starts.
D The [Scan] button on the ScanSnap flashes blue during scanning.
The following window appears to show the scanning progress.
D When scanning is completed, the corresponding action of the selected profile is
performed.
z The [Scan] button setting is set to [Duplex Scan (Double-sided)] by default.
Note that you can switch the [Scan] button setting to [Simplex Scan (Single-sided)] in
ScanSnap Manager. For more details, refer to "Changing the Scan Settings" (page
181).
z You can also start the scanning from the ScanSnap Manager menu.
For more details, refer to "ScanSnap Manager Menu" (page 170).
z Do not connect and disconnect the ScanSnap and other USB devices during scanning.
z Do not close the ADF paper chute (cover) during scanning.
z Do not switch users during scanning.
z By default, documents are scanned by the following settings: [Image quality: Normal],
[Color mode: Auto Color Detection], [Scanning side: Duplex Scan].
For information on how to change scan settings, refer to "Changing the Scan Settings"
(page 181).
z Before scanning documents of printed or handwritten text, select the [Scanning] tab J
[Option] button J [Setting for text only document] checkbox in the ScanSnap setup
window.
z The application that starts after scanning varies depending on what is selected in the
[Application] tab in the ScanSnap setup window. For details, refer to the ScanSnap
Manager Help.
z The output image may slightly differ from the original document in size.
z When Cardiris is started and becomes active (Cardiris selected in the menu),
ScanSnap Manager automatically links with the active application, the settings of which
are used for scanning. Automatic linkage is disabled when the application is not active.
For information on automatic linkage, refer to "Automatic Linkage with Applications"
(page 194).

Fujitsu ScanSnap S1300 Specifications

General

Film scanning	No
Color scanning	Yes
Maximum scan size	216 x 360 mm
Scanner type	Sheet-fed scanner
Sensor type	CIS
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5, B6
Maximum ISO A-series paper size	A4
Auto document feeder (ADF) input capacity	10 sheets
USB version	2.0
Standard interfaces	USB 2.0
Scan media weight	64 - 104.7 g/m²
Dimensions (WxDxH)	284 x 99 x 77 mm
Power requirements	AC 100 - 240V, 50/ 60 Hz
Non-operating relative humidity (non-condensing)	20 - 80 %
Minimum RAM	512 MB
Minimum storage drive space	2197 MB
Sustainability certificates	ENERGY STAR
Power consumption (standby)	5 W
Power consumption (typical)	9 W
Operating temperature (T-T)	5 - 35 °C
Certification	RoHS

Weight and Dimensions

Depth	99 mm
Width	284 mm
Height	77 mm
Weight	1400 g