About Actions (for Mac OS users)
210
3. Change settings for the [Scan to E-mail] (If you do not want to change
any settings, go to Step 4.).
1. Click the [Application Setting] button.
DThe [Scan to E-mail - Options] window appears.
2. Change the settings.
For details about the [Scan to E-mail - Options] window, refer to ScanSnap Manager
Help.
3. Click the [OK] button to close the [Scan to E-mail - Options] window.
4. Click the [Apply] button in the ScanSnap setup window.
5. Click the [ ] button in the upper left corner or press the [esc] key to
close the ScanSnap setup window.
The ScanSnap setup window also closes when you press the [Scan] button on the
ScanSnap.
To Next Page
Loading...
