Fujitsu ScanSnap S1300 User Manual

Replacing the Pick Roller
297
11.Attach the sheet guide to the ScanSnap.
Hold the squeeze clips on the right of the sheet guide between your fingers, and attach
the sheet guide.
D The sheet guide makes a clicking sound when the squeeze clips fix into position.
12.Close the ADF top section.
D You should hear the ADF top section click when it returns to its original position.
13.Turn on the ScanSnap.
Make sure that the sheet guide is completely locked in. Otherwise, paper jams or other
feeding errors may occur.
Sheet guide
Squeeze clip
Squeeze clip
ADF paper chute (cover)
ADF top section

Fujitsu ScanSnap S1300 Specifications

General

Film scanning	No
Color scanning	Yes
Maximum scan size	216 x 360 mm
Scanner type	Sheet-fed scanner
Sensor type	CIS
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5, B6
Maximum ISO A-series paper size	A4
Auto document feeder (ADF) input capacity	10 sheets
USB version	2.0
Standard interfaces	USB 2.0
Scan media weight	64 - 104.7 g/m²
Dimensions (WxDxH)	284 x 99 x 77 mm
Power requirements	AC 100 - 240V, 50/ 60 Hz
Non-operating relative humidity (non-condensing)	20 - 80 %
Minimum RAM	512 MB
Minimum storage drive space	2197 MB
Sustainability certificates	ENERGY STAR
Power consumption (standby)	5 W
Power consumption (typical)	9 W
Operating temperature (T-T)	5 - 35 °C
Certification	RoHS

Weight and Dimensions

Depth	99 mm
Width	284 mm
Height	77 mm
Weight	1400 g