Chapter 3 Information About Software 41
RTIF1-
081006-004
OOODuring the firmware update, there
might be the following output
message and a XSCF panic might
occur.
kernel BUG in
jffs2_do_read_inode at
fs/jffs2/readinode.c:XXX!
Reset XSCF and use the
flashupdate(8) command to retry
the firmware update.
RTIF1-
081006-005
OOOThe network configuration on the
XSCF Web does not support the
function equivalent to the
setnetwork -r command. And
when you specified localhost or
localdomain to the host name or the
domain name, the error message
"SessionID has expired"
appears.
Use the setnetwork -r command
on the XSCF shell.
RTIF1-
081006-006
OOOThe panic log on the XSCF Web might
not be displayed from the top of the
message.
When the output is insufficient,
execute the showlogs panic
command on the XSCF shell.
RTIF1-
081006-007
OOOThe password(8) command indicates
that the user operand is optional but
will fail if a user operand is not
included when other options are
specified.
No workaround is available.
Specify the user operand to execute
the password(8) command when you
specify other options.
RTIF1-
081006-011
OOOSNMP trap host configuration
changes are not valid until setsnmp
disable and setsnmp enable.
Modify the SNMP setting:
XSCF> setsnmp disable
XSCF> setsnmp enable
RTIF1-
081016-001
OOOPower failure at the commercial AC
supply connector to the UPS does not
send notification/send trap.
No workaround is available.
RTIF1-
081016-003
OOOIn Internet Explorer 6 or 7, clicking on
the [Reset] button then the [OK]
button from the [Settings]-[Audit]-
[Add Policy] pop-up screen will log
the user out with message:
Error
Session Error
Session ID has been expired
Log back into the browser interface
and use the [Backspace] key to clear
text in the [User] text box of the pop-
up screen instead of using the [Reset]
button.
TABLE 3-3 XCP Issues Fixed in Releases Earlier Than XCP 1121 (Continued)
ID M3000
M4000
M5000
M8000
M9000 Description Workaround
To Next Page
Loading...
