42 SPARC Enterprise Mx000 Servers Product Notes for XCP Version 1121 • February 2016
RTIF1-
081030-001
O The information related to the defined
LSB cannot be displayed on XSCF
Web [Domain Configuration] page
with an account which has single
domain privilege larger than DID15.
In addition, the operation for such
LSB by [XSB Config...] button cannot
be performed.
Use the showdcl(8), addboard(8),
deleteboard(8), moveboard(8)
command on the XSCF shell.
RTIF1-
081030-002
OOOWhen the timezone other than three
characters has been set, the error logs
cannot be displayed on XSCF Web
[Error Log] page.
In addition, XSCF Web [Panic Log]
and [IPL Message Log] pages display
the date on the table with "---".
Use the showlogs(8) command on
the XSCF shell.
RTIF1-
081104-001
OOOThe monitor message log might not be
registered when a PCI slot error
detected.
No workaround is available.
Use the showlogs error command
or the fmdump command to check the
fault information of PCI slot.
RTIF1-
090108-001
OOOThe domain console may display this
message:
ipsec_check_inbound_policy:
Policy Failure for the
incoming packet (not secure)
This message can be safely ignored.
RTIF1-
090108-002
OOOIn the dual power feed system, when
the power failure and the power
recovery occurred repeatedly on one
line, all domains will be forcibly
powered off. And in the power
recovery from the forced power-off, a
PSU illegal configuration might be
registered in the error log and the
power recovery might not be started.
You need to remove and insert the
power cable.
TABLE 3-3 XCP Issues Fixed in Releases Earlier Than XCP 1121 (Continued)
ID M3000
M4000
M5000
M8000
M9000 Description Workaround
To Next Page
Loading...
