46 SPARC Enterprise Mx000 Servers Product Notes for XCP Version 1121 • February 2016
RTIF1-
091021-001
OOOWhile Active Directory is enabled, if
you log in to XSCF using the user
name that registered in the Active
Directory server, the
showconsolepath(8) command
displays not the log-in user name but
"proxyuser."
No workaround is available.
RTIF1-
091105-001
OOOThe loadcert console operand is
missing in the usage of the setad(8)
command and the setldapssl(8)
command.
For how to use the loadcert
console operand of the setad(8)
command and the setldapssl(8)
command, see the man page.
RTIF1-
091109-001
OOOOnce domain detected a failure
related to DIMM or PCI, the error log
about this detected failure is
registered every time you reset XSCF.
This error log can be safely ignored.
RTIF1-
091109-002
OOOIn XSCF, a host route cannot be set.
When you use the setroute(8)
command and set the netmask to
255.255.255.255, it returns an invalid
parameter.
To set a host route, do not specify the
netmask (-m option).
RTIF1-
091109-003
OOOWhen you use the setnameserver(8)
command or the DNS setting of XSCF
Web to register the DNS server or the
search path, you can specify two or
more same IP address values or
domain names.
However, when you specify two or
more same IP address values or
domain names to delete all the DNS
servers or the search paths which are
same, it returns an invalid
parameter.
To delete all the DNS servers or the
search paths which are same, specify
just one corresponding address or
domain name.
In doing so, all the DNS servers or the
search paths which are same will be
deleted. Register the data again as
needed.
TABLE 3-3 XCP Issues Fixed in Releases Earlier Than XCP 1121 (Continued)
ID M3000
M4000
M5000
M8000
M9000 Description Workaround
To Next Page
Loading...
