EasyManua.ls Logo

Fujitsu SPARC Enterprise M3000

Fujitsu SPARC Enterprise M3000
144 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 3 Information About Software 61
6660168 OOOIf a ubc.piowbeue-cpu error
occurs on a domain, the Oracle Solaris
Fault Management cpumem-diagnosis
module might fail, causing an
interruption in FMA service.
If this happens, you will see the
following output in the console log:
SUNW-MSG-ID: FMD-8000-2K,
TYPE: Defect, VER: 1,
SEVERITY: Minor
EVENT-TIME: Fri Apr 4
21:41:57 PDT 2008
PLATFORM: SUNW,SPARC-
Enterprise, CSN: 2020642002,
HOSTNAME: <hostname>
SOURCE: fmd-self-diagnosis,
REV: 1.0
EVENT-ID: 6b2e15d7-aa65-6bcc-
bcb1-cb03a7dd77e3
DESC: A Solaris Fault
Manager component has
experienced an error that
required the module to be
disabled. Refer to
http://sun.com/msg/FMD-8000-
2K for more information.
AUTO-RESPONSE: The module has
been disabled. Events
destined for the module will
be saved for manual
diagnosis.
IMPACT: Automated diagnosis
and response for subsequent
events associated with this
module will not occur.
REC-ACTION: Use fmdump -v -u
<EVENT-ID> to locate the
module. Use fmadm reset
<module> to reset the
module.
If FMA service fails, issue the
following command on the domain to
recover:
# svcadm clear fmd
Then restart cpumem-diagnosis:
# fmadm restart cpumem-
diagnosis
6745410 OOOBoot program ignores the Kadb option
which causes the system not to boot.
Use kmdb instead of kadb.
TABLE 3-4 Oracle Solaris OS Issues and Workarounds for All Supported Releases (Continued)
CR ID M3000
M4000
M4000
M8000
M9000 Description Workaround

Table of Contents

Other manuals for Fujitsu SPARC Enterprise M3000

Related product manuals