62 SPARC Enterprise Mx000 Servers Product Notes for XCP Version 1121 • February 2016
6765239 O If a SAS device containing multiple
SAS targets is connected to the
onboard external SAS interface, it will
not work properly. The enumeration
of target IDs within the device may
change across reboots.
Use a FUJITSU SAS card
(SE0X7SA1F/SE0X7SA1X).
Alternatively, check for the
availability of a patch for this defect.
7009469 O Creating a RAID configuration using
the raidctl(1M) command generates
a warning message on initial process.
Subsequent RAID configurations do
not.
No workaround is available.
7135497 O On systems with the RAID-capable
IOUA card and running Oracle Solaris
11, after a RAID volume is deleted
using raidctl -d , the format
utility does not display the disk.
Execute cfgadm(1M):
cfgadm -c unconfigure cn where cn
is the controller number.
18055846 O O When adding a PCI Expansion Unit
by PCI hot plugging (PHP), Oracle
Solaris may panic by producing the
following message:
panic[cpuX]/thread=
XXXXXXXXXX: Fatal error has
occurred in: PCIe
fabric.(0xX)(0xXX).
There is no effective workaround.
Do not hot plug a PCI Expansion
Unit. There is no problem in hot
replacing in respect to the same slot.
TABLE 3-4 Oracle Solaris OS Issues and Workarounds for All Supported Releases (Continued)
CR ID M3000
M4000
M4000
M8000
M9000 Description Workaround
To Next Page
Loading...
