EasyManua.ls Logo

Fujitsu SPARC Enterprise M3000

Fujitsu SPARC Enterprise M3000
144 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 3 Information About Software 83
6534471 O O Systems may panic/trap during
normal operation.
For Oracle Solaris 10 11/06, this has
been fixed in patch 125100-06.
If a patch is not available, disable the
kernel large page sTLB programming.
In the file /etc/system,
change the variable
heaplp_use_stlb to 0:
set heaplp_use_stlb=0
6535564 O O PCI hot plug to PCI slot #0, #1 or
External I/O Expansion Unit may fail
on XSB added by DR.
For Oracle Solaris 10 11/06, this has
been fixed in patch 120011-08.
[Workaround]
Use DR instead of PCI hot plug if
need to add or remove PCI card on
the XSB.
6539084 O O Under Oracle Solaris 10 11/06, there is
a low probability of a domain panic
during reboot when the PCIe Quad-
port Gigabit Ethernet UTP Low
Profile Adapter (X4447A-Z) is present
in a domain.
No workaround is available.
6539909 O O Under Oracle Solaris 10 11/06, do not
use the following adapters for
network access when you are using
the boot net install command to
install the Oracle Solaris OS:
PCIe Quad-port Gigabit Ethernet
UTP Low Profile Adapter (4447A-
Z/
X4447A-Z)
PCIe Dual 10 Gigabit Ethernet Fiber
XFP Low Profile Adapter (1027A-
Z/
X1027A-Z)
Use an alternate type of adapter or
onboard network device to install the
Oracle Solaris OS via the network.
6542632 O O Memory leak in PCIe module if driver
attach fails.
For Oracle Solaris 10 11/06, this has
been fixed in patch 120011-09.
No workaround is available.
TABLE 3-11 Oracle Solaris OS Issues Fixed in Oracle Solaris 10 8/07 (Continued)
CR ID M3000
M4000
M5000
M8000
M9000 Description Workaround

Table of Contents

Other manuals for Fujitsu SPARC Enterprise M3000

Related product manuals