EasyManua.ls Logo

Fujitsu SPARC Enterprise M3000

Fujitsu SPARC Enterprise M3000
144 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
82 SPARC Enterprise Mx000 Servers Product Notes for XCP Version 1121 February 2016
6509337 O O s10s_u3 wanboot fails - The server
returned 416: Requested Range Not
Satisfiable.
No workaround is available.
6510861 O O When Dual-Channel Ultra320 SCSI
Card (SE0X7SC2F, SE0X7SC2X) is
mounted, correctable errors(CE) occur
and system may panic.
For Oracle Solaris 10 11/06, this has
been fixed in patch 120011-08.
[Workaround]
Add the following entry to the
/etc/system file and then reboot
the system:
set pcie:pcie_aer_ce_mask =
0x31c1
6520990 O O Domain may cause a panic when
deleteboard(8) command for kernel
board by using Dynamic
Reconfiguration (DR).
For Oracle Solaris 10 11/06, this has
been fixed in patch 120011-08.
[Workaround]
To mask this error, add the following
entry to the /etc/system file.
set drmach:fmem_timeout = 30
6527781 O The cfgadm command fails while
moving the DVD/Tape drive unit
between two domains.
For Oracle Solaris 10 11/06, this has
been fixed in patch 125081-06.
No workaround is available. To
reconfigure DVD/Tape drive unit,
execute reboot -r from the domain
exhibiting the problem.
6530178 O O DR addboard(8) command can hang.
Once problem is observed, further DR
operations are blocked. Recovery
requires reboot of the domain.
For Oracle Solaris 10 11/06, this has
been fixed in patch 120011-07.
No workaround is available.
6530288 O O Ap_Id format may not be shown
correctly by cfgadm(1M) command.
For Oracle Solaris 10 11/06, this has
been fixed in patch 120011-07.
No workaround is available.
TABLE 3-11 Oracle Solaris OS Issues Fixed in Oracle Solaris 10 8/07 (Continued)
CR ID M3000
M4000
M5000
M8000
M9000 Description Workaround

Table of Contents

Other manuals for Fujitsu SPARC Enterprise M3000

Related product manuals