First-time setup of your device
First-time setup of your devic
e
First- timese tupGettingstarted
Please read the chapter "Important notes", Page 1 3.
If your device is equipped with a Windows operating system, the necessary
hardware drivers and supplied softw are a re already pre-installed.
Beforeswitchingitonforthefi rst time, connect the device to the AC voltage using
the AC a dapter, see "
Connecting the AC adapter", Page 19. The AC adapter must
remain connected during the whole of the installation process.
A system test is performed when your device is first switched on. Various messages
can appear. T he display may remain dark for a short time or may flicker.
Please follow the instructions on the screen.
NEVER switch off your device during the first-time setup process.
The battery must be charged if you want to operate your device using the battery.
When used on the move, the built-in battery provides the device with the necessary power. You
can increase the operating time by using the available energy-saving functions.
For instructions on how to connect external devices (e.g. mouse, printer) to your Tablet
PC, please refer to the operating manual for your device.
Unpacking and c
hecking the device
If you find that damage has occurred during transport, please notify
your local sales outlet immediately!
► U npack all the individual p arts.
PackagingTransport
► C heck your d
evice for any visible damag e which may have occurred during transportation.
You may nee
d to reuse the packaging in the future, for e xamp le if
you need t
o ship your device.
18 Fujitsu
To Next Page
Loading...
