Accessories for your Tablet PC ( opti
onal)
Connecting the Tab let PC/TPU cover unit to the dockin g cradle
1
1
► Position the Ta
blet PC /TPU cover unit so that it lies against the storage surface of the cradle.
► C arefully push the unit onto the cradle in the direction of the arrow (1) until you feel it engage
on the connector and until the slide-out position returns to its original position.
To disconnect the unit from the docking cradle, proceed as described in section
"
Disconn ecting the Tablet PC from the cradle ", Page 42.
52 Fujitsu
To Next Page
Loading...
