Appendix
Configuring the Wireless LAN
The optional WLAN device can be con figured to establish wireless netw ork connectivity
using the software that is built into Windows. Support for most industry standard
security solutions is contained in this software.
Pre-defined parameters will be required for this procedure. Please consult with
your network administrator for these parameters:
Connection to the netwo
rk
After you have c onfigured your computer, you can connect to an active network
by performing the following steps:
1. Click on the WLAN icon in the system tray.
2. Select Connect to a ne
twork.
3. Select a network from the list that appears, and click the Connect button.
92 Fujitsu
To Next Page
Loading...
Need help?
General