First-time se tup of yo ur d evice
First-time setup of your devic
e
First- time setu pGettingstarted
Please read the cha pter "Important notes", Page 13 .
If your device is equipped with a Windows operating system, the necessary
hardware drivers and supplied software are a lready pre-installed.
Beforeyouswitchonthedeviceforthefirst time, connect it to the mains voltage
using the mains adapter, see "
Mains adapter conne cting", Page 18.Themains
adapter must be connected d uring the entire installation process.
A system test is pe rformed when your device is first switched on. Various m essages
can appear. The display may remain dark for a short time or m ay flicker.
Please follow the instructions on the screen.
NEVER switch off your device during the first-time setup process.
The battery must be charged if you w ant to operate your device using the battery.
When used on the move, th e built-in battery provides the device with the necessary power. You
can increase the operating time by using the available energy-saving functions.
For instructions on how to connect external devices (e.g. mouse, printer) to your
device, please r efer to the operating ma nual for your device.
Unpacking and c
hecking the device
Should you discover any damage that occurred during transportation,
notify your local sales outlet immediately!
► Unpack all the individual parts.
PackagingTranspo rt
► Check your d
evice for any visible damage w hich may have occurred during transportation.
You may nee
d the packaging in the fu ture, if yo u need to tra nsport your device.
17