Fujitsu Stylistic Q702

Working with the Table t PC
Inserting the SIM card
► Slide the protective rubber cover o f th e S IM
card slot in the direction o f the arrow.
► Op en the protective rubber cover over
the SIM card sl ot.
Do not pull on the SIM card lock! T he lock could break off o therw ise. Always
slide the lock in the direction of the arrow as shown.
3
1
2
► Slide th e SIM card clip in the direction
of the arrow (1).
The clip controls the power supply for the
UMTS / LTE module. The UMTS / LTE
module is switched off while the clip is open.
► Slide the SIM card as shown into
slot (2) u ntil it engages.
► Slide th e SIM card clip in the direction
of the arrow (3).
► Close the protective rubber cover of
the SIM card sl ot.
40