Fujitsu STYLISTIC V535 User Manual

Appendix
Auto-installation support for essential access software
from backup location
The below listed steps are applicable in cases in which a backup cop y was created as
mentioned in the section “Creating a B ackup of essential access software”.
1. It is importan t to have the extracted Auto installer software package folder
and Readme file in the same location as other sof tware folders. Otherwise
auto-installation of the software will not be supp orted.
2. Inside the Auto Installer software package, launch FjAutoinstall.exe as an Administrator.
3. Click Ye s on the User Account Control d ialog box. This will take some time to
process the so ftware packages. A message will be displayed during this time stating,
“Please wait while the content is being processed”.
4. If EULA is displayed for Fujitsu Software Auto Installer, accept the EULA, otherwise continue.
5. The Fujitsu Software Auto Installer user interface will be launched providing ability
to auto install the essential access software on the system.
6. It is recommended that you install all the software in the listed order. You can
“Select All”, to install the software in the order listed.
7. Click the Install button to start the installatio n .
8. After i ns talling all the selected drivers, Installation Results window is be displayed. Click OK.
9. “You must re start the system for the settings to take effect. Do you wish to
reboot now?” me ssage appears. Select Yes.
10. The system will now reboot.
Auto Installation support for the software downloaded from support website
1. Download FSDM (Fujitsu Software Download Manager) from the support site and download all
the drivers applicable to the model and OS using FSDM if the y are not downloaded yet.
2. When the s oftware packages are downloaded from web, it is important to download
the A u to Installer Sof tware package and the model/language- speci fic Readme
file if you prefer to auto install t he s oftware.
3. It is imp ortant to have the extracted Auto Installer software package fo lder
and Readme file in the same location as other sof tware folders. Otherwise
auto-installation of the software will not be supp orted.
4. Inside the Auto Insta ller software packa ge, launch FjAutoinstall.exe as administrator.
5. Click Ye s on the User Account Control d ialog box. This will take some time to
process the so ftware packages. A message will be displayed during this time stating
“Please wait while the content is being processed”.
6. If EULA is displayed for Fujitsu Software Auto Installer, accept the EULA, otherwise continue.
7. The Fujitsu Software Auto Installer user interface will be launched p roviding the ability
to auto install the software downloaded from support site.
8. It is recommended that you install all the software in the listed order. You can
Select All, to install the software in the order listed.
9. Click the Install button to start the installatio n .
10. After installing all the selected drivers, the Installation Results window is displayed. Click OK.
11. “You must restart the system for the settings to take effect. Do you wish to
reboot now?” me ssage appears. Select Yes.
12. The system will now reboot.
Fujitsu 101

Fujitsu STYLISTIC V535 Specifications

General

Stepping	C0
Processor code	SR1SK
Processor cache	2 MB
Processor cores	4
System bus rate	- GT/s
Processor family	Intel Atom®
Processor series	Intel Atom Z3700 Series
Processor codename	Bay Trail
Motherboard chipset	Intel BayTrail-T SoC
Processor frequency	1.59 GHz
Processor cache type	L2
Processor lithography	22 nm
Processor manufacturer	Intel
Processor package size	17 x 17 mm
Conflict-Free processor	Yes
Processor front side bus	- MHz
Processor boost frequency	2.39 GHz
Processor operating modes	32-bit, 64-bit
Scenario Design Power (SDP)	2 W
Internal memory	4 GB
Memory clock speed	1066 MHz
Internal memory type	LPDDR3-SDRAM
Storage media	-
Compatible memory cards	MicroSD (TransFlash)
Internal storage capacity	64 GB
Display diagonal	8.3 \
Touch technology	Multi-touch
Display brightness	400 cd/m²
Display resolution	1920 x 1200 pixels
Native aspect ratio	16:10
Graphics card	HD Graphics
Rear camera type	Single camera
Rear camera resolution (numeric)	8 MP
Front camera resolution (numeric)	2 MP
Number of built-in speakers	2
Wi-Fi standards	802.11a, 802.11b, 802.11g
Bluetooth version	4.0
Top Wi-Fi standard	Wi-Fi 4 (802.11n)
Microphone in	No
USB 2.0 ports quantity	1
Device type	Mobile tablet
Form factor	Slate
Product color	Black
Cable lock slot type	Kensington
Sustainability certificates	RoHS
Certification	CE, EN 60950, IT-Eco-Declaration, RoHS, WEEE, GOST
Battery capacity	4425 mAh
Battery life (max)	6.5 h
Battery recharge time	5 h
AC adapter power	36 W
AC adapter frequency	50 - 60 Hz
AC adapter input voltage	100 - 240 V
AC adapter output current	3 A
AC adapter output voltage	12 V
Platform	Windows
Operating system version	64
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 90 %
Processor ARK ID	80267
Processor socket	BGA 1380

Weight and Dimensions

Depth	12.5 mm
Width	227.8 mm
Height	150.1 mm
Weight	540 g