7. Firmware Versions
Because of the availability of two, quite different firmware branches, these are mentioned here.
7.1. Firmware for the FullClean Plus, covered by this Manual
This manual covers the following firmware:
• FCC GB/CZ/P 1.04. Contains the English (GB), the Czech (CZ) and the Polish (P)
language
• FCC NL/F/D 1.04. Contains the Dutch (NL) French (F) and the German (D) language
The difference between these two is only the available languages.
7.2. Firmware NOT covered by this Manual
This firmware version was developed for the UK FC+ Closed Circuit Washing system, the
software programs and output assignments are not covered in this manual.
For information about a FullClean Plus controller with this firmware, contact Fullwood Packo
Ltd.