Fullwood Packo FullClean Plus - System Settings Configuration; Options and Settings of the Heat Based Cleaning System

Doc No:
006614
Fullwood Packo FullClean Plus
Revision:
D
Date:
14/08/2020
Page 40 of 58
12.1.5. Options and Settings of the Heat Based Cleaning System
The following tables detail the options and settings of the Heat Based Cleaning System.
Table 5 FullClean 1.04 GB/CZ/P Heat Based Cleaning System
Main Menu
item
Sub Menu items
Range
Default
User
General
Language
EN / CZ / PL
EN
Cleaning system
None / Heat based /
Circulation
None
Perform full reset
No / Yes
No
Pre-rinse
Water outlet
Waste, Water spray unit,
Water storage, Drinking
trough.
Waste
Drain time
mm:ss 0:00-59:59
3:00
Milk Meter start delay
mm:ss 0:00-10:00
0:30
Milk Meter on-time
mm:ss 0:00-10:00
0:35
Milk Meter off-time
mm:ss 0:00-10:00
0:45
ACR start delay
mm:ss 0:00-10:00
0:00
ACR on-time
mm:ss 0:00-10:00
0:00
ACR off-time
mm:ss 0:00-10:00
0:00
Air inj. start delay
mm:ss 0:00-10:00
0:25
Air inj. on-time
mm:ss 0:00-10:00
0:07
Air inj. off-time
mm:ss 0:00-10:00
0:13
Pulsator start delay
mm:ss 0:00-10:00
0:00
Pulsator on-time
mm:ss 0:00-10:00
0:00
Pulsator off-time
mm:ss 0:00-10:00
0:00
Dry time
mm:ss 0:00-10:00
0:25
Vessel drain time
mm:ss 0:00-10:00
0:15
Hot wash
Chemical disp. delay
mm:ss 0:00-10:00
0:05
Chemical amount
mm:ss 0:00-10:00
2:20
Max. water dump time
mm:ss 0:00-10:00
1:30
Milk Meter start delay
mm:ss 0:00-10:00
0:30
Milk Meter on-time
mm:ss 0:00-10:00
0:35
Milk Meter off-time
mm:ss 0:00-10:00
0:45
ACR start delay
mm:ss 0:00-10:00
0:00
ACR on-time
mm:ss 0:00-10:00
0:00
ACR off-time
mm:ss 0:00-10:00
0:00