Furuno FELCOM 16 - Automatically Saving Received Messages to the Hard Disk

4. INMARSAT C OPERATIONS
4-29
4.2.6 Automatically saving received messages to the hard disk
You may automatically save received messages other than confidential or
password-affixed messages to the hard disk as follows:
1. Press the [F8] key.
2. Press the [5] key to display the Auto Mode Setup menu.
Auto Mode Setup
Auto Log Print OFF
Receive Alarm OFF
Auto Receive Message Save OFF
Auto Receive Message Print OFF
Data Report & Polling Print OFF
Auto EGC Message Save
Auto EGC Message Print
Auto mode setup menu
3. Press the [↑] or [↓] key to choose Auto Receive Message Save.
4. Press the [Enter] key to open the auto receive message save options
window.
5. Press the [↑] key to choose ON.
6. Press the [Enter] key to close the window.
7. Press the [Esc] key twice.
Note: To designate directory where to store receive messages, see paragraph
2.9.2.