5. DATA REPORTING AND POLLING
5-13
5.3.2 Enabling/Disabling DNID
DNID can be enabled or disabled as follows:
1. Press the [F5] key followed by the [3] key to show the Data Network ID list.
2. Press the [↓] or [↑] key to choose desired DNID from the data network ID list.
3. Press the [Enter] key to enable or disable the DNID as appropriate. An
asterisk appears next to the DNID when it is enabled.
Note: If a DNID is disabled during data reporting, “running data program
(poll)” is displayed and polling is cancelled.
4. Press the [Esc] key twice to return to the standby display.
To Next Page
Loading...
