Furuno FELCOM 16 - Error Messages and Alerts

1. OPERATIONAL OVERVIEW
1-12
3. Press the [↑] or [↓] key to choose option desired and press the [Enter] key.
4. Press the [Esc] key.
Note 1: On some menus the update window appears after you press the [Esc]
key. This is done to ask you to confirm settings. Yes is selected in the
Update window; press the [Enter] key to register settings, or press [→]
to choose No and press the [Enter] key to escape.
Update
Yes No
Note 2: The following functions are not available:
Keying Sequence
Item
F3-1 Selection of Priority on Transmit Message
F8-1 NAV PORT, MESSAGE OUTPUT PORT, ACTIVE
PORT, EGC OUTPUT PORT, NETWORK SETUP
on System Setup menu
F8-4 Waypoint on EGC Setup
1.5 Error Messages and Alerts
The terminal unit displays error messages and alerts to call your attention to
misoperation, failed operation and system error. A list of error messages appears
in Chapter 7 and alerts in the Appendix.
To erase an error message or alert, press the [Esc] key.
No. Message File Station LES Priority Send Status Delivery
Send Message Log
Log
CAUTION
No Message.
<Press ESC key to continue>
File Edit Transmit EGC Reports Logs Options Setup Position StopAlarm
1. Send Message Log
2. Receive Message Log
Location of error messages and alerts