2. SYSTEM INITIALIZATION
2-7
2.3.2 Logout
1. Press the [F7] key to display the Options menu.
2. Press the [2] key to display the logout screen.
Note: The terminal unit must be “idle” to logout. When it is not idle, “Ignored:
MES is not idle.” appears. Press the [Esc] key to return to the standby
display. Wait until the terminal unit becomes idle.
Current State: IDLE
Successful Login.
DCE F16 Ver.**
SYNC ( NCS )
NCS: IOR LOGIN
02-02-25 02:04 (UTC)
LAT: 34:30.00N
LON: 135:30.00E
Options
Logout
Start
Yes No
File Edit Transmit EGC Reports Logs Options Setup Position StopAlarm
Options menu, logout screen
3. Yes is selected; press the [Enter] key to start logout. The screen now looks
something like the illustration below.
Current State: LOGOUT
CALLING
DCE F16 Ver. **
02-02-25 02:02 (UTC)
LAT: 34:30.00N
LON: 135:30.00E
SYNC ( NCS )
NCS: IOR LOGIN
Options
Logout
Starting Logout Process.
Press any key to escape.
File Edit Transmit EGC Reports Logs Options Setup Position StopAlarm
Appearance of display screen during logout
4. When logout is completed, “Successful Logout.” appears. “Current State”
then returns to IDLE.
5. Turn off the FELCOM 16.
To Next Page
Loading...
