EasyManua.ls Logo

Furuno FELCOM 16 - SPECIFICATIONS; General, Antenna Unit, and Source Specifications; Environmental Conditions and Coating Information

Furuno FELCOM 16
187 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
FURUNO
FELCOM 16
SP-1 E5638S01G
SPECIFICATIONS OF INMARSAT C MES
FELCOM 16
1 GENERAL
1.1 Transmitting Frequency 1626.5 to 1646.5 MHz
1.2 Receiving Frequency 1530.0 to 1545.0 MHz
1.3 Channel Interval 5 kHz
1.4 G/T Better than -23 dB/K (elevation angle 5°)
1.5 EIRP 7 to 16 dBW (elevation angle 5°)
1.6 Modulation BPSK
1.7 Modulation Rate 1200 sps
1.8 Coding Convolution with coding rate 1/2 and constraint length 7
1.9 Decoding Viterbi decoder
1.10 Internal GPS Board GGA, ZDA, GLL, VTG, RMC, GSV (IEC61162-1)
2 ANTENNA UNIT
2.1 Antenna Type Daisy Loop Antenna
2.2 Gain
Horizontal: Omnidirectional
Vertical: 0 dBi or more (angle of elevation: 90°)
+1.3 dBi or more (angle of elevation: 5°)
2.3 Declination Clockwise circular
2.4 Axial Ratio Within 6 dB (5° to 90°)
2.5 VSWR 1.5 or less (50 ohm)
3 SOURCE
3.1 Communication Unit 12-24 VDC: 6.0-2.0 A (Transmit), 0.6-0.4 A (Receive)
4 ENVIRONMENTAL CONDITION
4.1 Ambient Temperature
Exposed equipment: -35°C to +55°C (storage: -35°C to +70°C)
Protected equipment: -15°C to +55°C
4.2 Relative Humidity 95% (at +40°C)
4.3 Waterproof (IEC 60529)
Antenna Unit IPX6
Communication Unit IPX2
Others IPX0
4.4 Vibration IEC 60945
5 COATING COLOR
5.1 Antenna Unit Upper: N9.5, Lower: 2.5PB3.5/10
5.2 Communication Unit Cover: N3.0, Panel: N1.0
5.3 Others 2.5GY5/1.5

Table of Contents

Other manuals for Furuno FELCOM 16

Related product manuals