Furuno FELCOM 16 User Manual

2. SYSTEM INITIALIZATION
2-16
Automatically printing EGC messages
1. Press the [F8] key to display the Setup menu.
2. Press the [5] key to display the Auto mode setup menu.
3. Press the [↓] key to choose Auto EGC Message Print and then press the
[Enter] key.
Auto Mode Setup
Auto EGC Message Print
System OFF
FleetNET OFF
SafetyNET (Routine) OFF
SafetyNET (Safety) OFF
SafetyNET (Urgent & Distress) OFF
Auto EGC message print menu
4. Press the [↓] or [↑] key to choose message type and then press the [Enter]
key.
5. Choose ON or OFF as appropriate and press the [Enter] key to close the
window.
6. Press the [Esc] key three times to return to the standby display.

Furuno FELCOM 16 Specifications

General

Brand	Furuno
Model	FELCOM 16
Category	Security System
Language	English