4. INMARSAT C OPERATIONS
4-4
6. Press the [↑] or [↓] key to choose station and then press the [Enter] key. To
choose multiple stations* (simultaneous transmission), choose a station and
then press the Space bar. Selected stations are marked with an asterisk (in
case of Telex or FAX). For e-mail address, press the Space bar to choose
“To” “Cc,” Blank, “To”… consecutively. * = Max. 10 telex stations, 7 FAX, 10
e-mail and one SMS.
Station List
Group Station Name Type Code ID / Address
321
343199999
TELEX
TELEX
81
583
x1 FURUNO
x2
FRNINMBTSTS
01
02
03
04
05
06
07
08
: Select SPACE: Select Stations B.SPACE: Cancel Mark INS: Edit
Sort (Ctrl+G: Group, Ctrl+N: Station Name, Ctrl+T: Type)
E-Mail
E-Mail
Seagull@furuno.co.jp
whale@furuno.co.jp
x3 Seagull
x4 whale
*
*
Station list
Note 1: Messages having different communication format or prefix code
(two digit code) cannot be sent simultaneously.
Note 2: To stop simultaneous transmission (erase asterisk, To or Cc), press
the [Backspace] key.
Note 3: You may sort the list by group name, station name or
communication type as follows:
Group name: Each press of [Ctrl] + [G] sorts the list by group name,
ascending or descending order.
Station name: Each press of [Ctrl] + [N] sorts the list by station
name, in ascending or descending order.
Comm. type: Each press of [Ctrl] + [T] sorts the list by
communication type, in ascending or descending order.
Note 4: You may edit the communication charges (see paragraph 2.7.1)
from the Station List by pressing the [Insert] key. After editing
charges, press the [Esc] key. “OK to save” appears; press the
[Enter] key.
7. For E-mail follow the procedure below. For other communication formats go
to step 8.
(1) Press the [↓] key to choose Subject.
(2) Press the [Enter] key to open subject entry window.
(3) Type subject.
(4) Press the [Enter] key to close the window.
(5) To attach a file, press the [↓] key to choose Attach File.
To Next Page
Loading...
