− The BIOS firmware digital signature update mechanism is supported. During
the upgrade, the digital signature is verified to prevent unauthorized BIOS
firmware upgrade.
− The flash security protection mechanism is supported to prevent
unauthorized modification of the flash memory in the OS.
The service port with NC-SI enabled supports the following configuration:
⚫
Configuring any port on the FlexIO card or PCIe NIC as the service port with NC-SI enabled.
Host port 1 is configured by default.
⚫
Enabling, disabling, and setting a virtual local area network (VLAN) ID for this port. The
VLAN ID is 0 and disabled by default.
⚫
Configuring IPv4 addresses (IPv4 address, subnet mask, and gateway) and IPv6 addresses
(IPv6 address, prefix length, and gateway) for this port.
Energy Efficiency
⚫
The 80 Plus Platinum power supply units (PSUs) of multiple power ratings
provide 94% power efficiency at 50% load.
⚫
The server supports active/standby power supplies and high-voltage DC (HVDC)
for improved power supply efficiency.
⚫
Efficient voltage regulator-down (VRD) power supplies for boards minimize the
energy loss from DC/DC power conversion.
⚫
Area-based, Proportional-Integral-Derivative (PID) intelligent fan speed
adjustment and intelligent CPU frequency scaling optimize heat dissipation and
reduce overall system power consumption.
⚫
The improved thermal design with energy-efficient fans ensures optimal heat
dissipation and reduces system power consumption.
⚫
The server is protected with power capping and power control measures.
⚫
Staggered spin-up for drives reduces the server boot power consumption.
⚫
Intel® Intelligent Power Capability allows a processor to be powered on or off
based on requirements.
⚫
Low-voltage Intel
®
Xeon
®
Scalable processors consume less energy, ideally
suited for data centers and telecommunications environments constrained by
power and thermal limitations.
⚫
SSDs consume 80% less power than HDDs.
To Next Page
Loading...
General