41
Functions
Throttle EXP/TH-EXP (Throttle system)
when you want to quicker the rise and use the (-)
button to adjust the - side when you want to make
the rise milder.
3 When ending adjustment, return to the initial
screen by pressing the (END) button 3 times.
Switching point
A vertical cursor line that shows the
curve switching point is displayed on
the setup screen graph.
For the VTR curve, only the high
side can be set. The brake be-
comes the EXP curve.
Adjustment range
RATE : -100 ~ 0 ~ +100%
TH.P : 20 ~ 100%
F-TYP : EXP, VTR, CRV
BRAKE : -100 ~ 0 ~ +100%
Adjustment buttons
- Use the (+) and (-) buttons to make
adjustments.
- Return to the initial value by pressing
the (+) and (-) buttons simultaneously
(approx. 1 sec).
Adjustment method for VTR curve
(Preparation)
- Select "VTR" at setup item "F-TYP".
-Select setup item "RATE" and make the following ad-
justments:
Setup items
RATE : Forward rate
TH.P : Curve switching point
F-TYP : Forward curve selection
BRAKE : Brake side rate
Setup item switching
- Use the (DN) or (UP) button to switch the setup item.
1 Forward side adjustment
Use the (+) button to adjust at + side when you
want to quicken the rise and use the (-) button to
adjust the - side when you want to make the rise
milder.
2 Curve switching point adjustment
When you want to change the curve switching
point relative to the throttle stick, select setup
item "TH.P" by pressing the (DN) button and use
the (+) and (-) buttons to move to the point you
want to set.
3 Brake side adjustment
Select setup item "BRAKE" by pressing the (DN)
button. When you want to quicken the rise, use
the (+) button to adjust the + side and when you
want to make the rise milder, use the (-) button to
adjust the - side.
4 When ending adjustment, return to the initial
screen by pressing the (END) button 3 times.
To Next Page
Loading...
