21
current, active model will be blinking.
Note: If the END key is held down for 0.5 seconds, the transmitter will return to the default screen and will
then display the current trim settings. When using the END key, press and release it to scroll through the
options.
4) To select a different model memory press the DATA INPUT lever and hold it downward or upward for
0.5 seconds until the desired model number appears. Release the DATA INPUT lever when the next model
memory (MODL) appears on the LCD. Continue repeating this procedure until the desired model memory
appears on the screen. Each time a new model memory is brought forth the T6J will emit a single audible
beep.
5) With the desired mode memory (MODL) on the screen, all programming inputs from this point forward
will affect only the model number on the screen (until another model number is selected).
Model Name function-
T6J allows up to four characters to be used in the naming designation for each model memory. By giving
each model a name that is immediately recognizable, you can quickly select the correct model, and minimize
Note: In addition to the model naming designation, the model memory number will also be present on the
home screen. This is an additional safety feature and will serve to also assist in model recognition.
Note: It is possible to change model names at any time, without impacting any of the other programming or
settings that have been input.
To assign a model name to a model memory location:
1) Turn the transmitter on.
2) Press and hold the MODE button to access the programming mode. An audible
double beep will be heard and the screen will display the model selection menu
(MODL). The number of the current, active model will be blinking. Select the
model you wish to name using the model memory select instructions above.
3) With the desired model memory on the LCD, press the SELECT key. The current
model naming designation will begin blinking on the screen.
or downward until the desired character appears on the LCD.
To Next Page
Loading...
Need help?
General
