GAT SMART.Lock 7000 System
General Information
10
HB_GAT-SMARTLOCK7000--EN_10
www.gantner.com
1. GAT SMART.Lock 7001
Electronic locker lock without connection cable and bolt set.
2. GAT SMART.Lock 7000 Bolt Set
Consisting of a door shackle, door plate and a distance plate. The bolt set is mounted on the locker door.
3. GAT SMART.Controller S 7000
The slave controller is a control unit where up to 24 GAT SMART.Lock 7001 can be connected.
4. GAT NET.Controller M 7000
The master controller is a control unit to connect up to 8 GAT SMART.Controller S 7000 slave controllers. The
master controller is used to connect the slave controllers to a server / PC.
5. GAT SMART.LockAxx 6350
Central reader to check user authorisation and control the GAT SMART.Lock 7001.
6. GAT NET.Power Supply 230V EU
Power supply for the slave and master controller. Different power cables sold separately (see item 7).
7. GAT NET.Power Cord XX
Power cord for the GAT NET.Power Supply 100-240V available in different versions:
XXX = "EU" (Euro plug), "UK" (UK), "AUS" (Australia), "US" (United States of America), "IND" (India)
8. Power Plug
Plug to supply multiple controllers with a single power supply.
9. GAT NET.Lock Cable 4m
4-pin connection cable (4 m) to connect a GAT SMART.Lock 7001 to a GAT SMART.Controller S 7000 slave
controller. MOLEX connector on both ends.
10. GAT SMART.Lock Cable 2m/4m
4-core connection cable (2 or 4 m) to connect a GAT SMART.Lock 7001 to a slave controller. With one unter-
minated cable end for connecting to a customer-specific controller.
11. GAT NET.Lock Connector
Connection socket to connect two GAT NET.Lock Cable 4m.
12. Ethernet Patch Cable
Standard network cable (min. CAT 5) to connect the slave controller to the master controller.
13. COM Converter
Different COM Converters are available to convert RS 485 to Ethernet.
2.2 Ordering Guide
For the planning and ordering of the GAT SMART.Lock 7000 system components, an ordering guide is available in
a separate document (“DK_GAT-SMARTLOCK7000_Bestellhilfe-EN ").