• Enable charging station
Under
Manage charging stations > Charging
Settings
, each charging station can be enabled/
disabled by the owner. If the charging station is
disabled, the charging station cannot be used.
• Charging station access
Each charging station can be set to free use
(default). This enables access for everybody. If the
EV driver identifies before connecting to the EV, the
charging transaction is registered to the EV driver.
At delivery the free use is enabled by default. The
charging station is at that time not set up for access
control. Free use can be used, even if the charging
station has defined EV drivers, those rights can be
seen as “overridden” by the free use.
• Invite drivers
Version: 1.3 65
Installation
To Next Page
Loading...
