Gatekeeper Y58 - Filedata

Y58 User Manual & Install Guide
129 of 148
DSM Config File Export
Click the (Export) button to export the
configuration settings to a file. This file will be
saved on an external storage device (most
commonly a USB flash drive attached to the
device USB port).
DSM Config File Import
Click the (Import) button to import the device
configuration settings from a file. You will need
a compatible configuration file saved on an
external storage device (most commonly a USB
flash drive attached to the device USB port).
6.6.2 FileData
Navigate to: Main Menu Setup Maintenance FileData
This subsection enables you to export the device data files for viewing and archival.
Please Note: If you are using the Finger Mouse/LCD combination to navigate you will need to use
a Gatekeeper Systems USB Hub to allow two devices to share the one USB port.
Data Export
All / Export Time
Radio buttons which enable you to choose
between either exporting all data, or data from
a specified time period:
All
Export Time
Start Time
This consists of the following two input fields:
Date – date field to select the start date
of the specified time period.
Time – time field to select the start
time of the specified time period.
Notes:
- Start time is only applicable if exporting
data using the Export Time option
End Time
This consists of the following two input fields:
Date – date field to select the end date
of the specified time period.