9 Hardware Installation
9.1 Quick Reference Guide for Installation
Installation Guidelines
Please note the following:
The device must be secured to an interior surface of the vehicle using the Tek Screws provided.
Wire the device into the vehicle according to the Quick Install Guide and the appropriate cabling
diagram.
DO NOT disassemble the device. There are no user-serviceable parts inside.
Configuration Guidelines
The device firmware must be configured before using the Y58.
Use an ICD2, G4 Connect, Monitor/Finger Mouse combination to access the setup menu.
Enter the following login information when prompted:
User name : admin
Password : admin
To Next Page
Loading...