Gatekeeper Y58 - Startup

Y58 User Manual & Install Guide
76 of 148
6.3.3 Startup
Navigate to: Main Menu Setup Basic Setup Startup
This subsection enables you to set the Startup characteristics of the device, as well behaviour of the
device whilst in sleep mode.
ON/OFF
Power UP/Shutdown
Mode
Drop-down list to select the conditions for
device Startup and shutdown:
Ignition – the device will turn on when
the vehicle ignition is on, and turn off
when the vehicle ignition is off.
Timer – the device will turn on
following the scheduled time,
regardless of the vehicle ignition
status.
Ignition or Timer – the device will
start either when the vehicle ignition is
on, or when the scheduled time starts.
However, the device will only turn off
when BOTH ignitions is off AND
scheduled time ends.
DEFAULT SETTINGS:
Ignition
DVR Power Off Delay
Numeric text field for setting the additional
time period that the device will continue
running after the vehicle ignition is off. The
device will only stop recording and shutdown
after this delay period is passed.
DEFAULT SETTINGS:
300
This means that when the vehicle is turned off,
the device will continue to record for another
300 seconds (5 minutes) before shutting down.
Timer From
This consists of two-time fields to set the start
time and end time for which the device will turn
on and turn off respectively.
Light off time
DEFAULT SETTINGS:
Never