Gatekeeper Y58 - Step 6: Setting Basic Preferences

Y58 User Manual & Install Guide
42 of 148
Device Info
Device ID
Leave this value as it is unless directed to
change by Gatekeeper Project Team.
Vehicle Info
Vehicle Plate
You can use this field to key in the vehicle
registration plate number.
Maximum of: 10 characters
Vehicle Num
Key in the identification code which will be used
to identify this particular vehicle in the fleet.
Maximum of: 10 characters
Line Number
You may use this field to identify a particular
route (if any) that the vehicle will be operating
on.
Maximum of: 10 characters
Driver Info
Driver Number
If the vehicle will have a specific driver, you may
use this field to key in the identification number
of the driver (if required).
Maximum of: 10 characters
Driver Name
If desired, you may also key in the name of the
vehicle driver here.
Maximum of: 10 characters
4.6 Step 6: Setting Basic Preferences
Next, you will need to setup the ignition on/off delay time.
Navigate to: Main Menu Setup Basic Setup Startup
Please verify that the following default settings are correctly configured. For a detailed explanation of
each setting, please see Section 6.3.3.
ON/OFF
Power Up/Shutdown
Mode
DEFAULT SETTINGS:
Ignition
DVR Power Off Delay
This means that when the vehicle is turned off,
the device will continue to record for another
300 seconds (5 minutes) before shutting down.