If the device is adjusting for daylight savings by
Week, you will need to specify the following:
Drop-down list to choose the start
month (from JAN to DEC).
Drop-down list to choose the start
week (either 1ST, 2ND, 3RD, 4TH or LAST).
Drop-down list to choose the start day
(from SUNDAY to SATURDAY).
Time field to choose the start time.
If the device is adjusting for daylight savings by
Date, you will need to specify the following:
Date field to set the start date.
Time field to set the start time.
DEFAULT SETTINGS:
MAR (month)
2ND (week)
SUNDAY (day)
02:00:00 (time)
This is a set of fields which allow you to choose
the ending point of the period for which the
device will adjust for daylight savings time.
If the device is adjusting for daylight savings by
Week, you will need to specify the following:
Drop-down list to choose the end
month (from JAN to DEC).
Drop-down list to choose the end week
(either 1ST, 2ND, 3RD, 4TH or LAST).
Drop-down list to choose the end day
(from SUNDAY to SATURDAY).
Time field to choose the end time.
If the device is adjusting for daylight savings by
Date, you will need to specify the following:
Date field to set the end date.
Time field to set the end time.
DEFAULT SETTINGS:
NOV (month)
1ST (week)
SUNDAY (day)
02:00:00 (time)
To Next Page
Loading...