Y58 User Manual & Install Guide
How to Log In
When attempting to access any of these functions, the system will check the log-on status of the user
before granting access to the function. If the user is not already logged in, the system will automatically
prompt the user to log in.
The system will display the log-in dialog box as shown below.
Click on the drop-down (˅) button at the right corner of the User Name field.
A drop-down menu will appear which will list all the users who are set up to access
the system.
Select the user name to use for this log-in by clicking on the desired user name in
the list.
Your selected user name will be displayed in the User Name field.
Click on the Password field to enter the password.
Using the on-screen keyboard which is displayed, key in the password.
When done, press the Enter ( ) key on the on-screen keyboard.
To Next Page
Loading...