After selecting the camera channels, you can also specify the time period of the
video data that you wish to export.
Click on the Playback Start Time to key in the specific start time of the video that
you wish to export.
If you are using the Finger Mouse or the ICD2, you may also click and drag the
Playback Start Time Marker to the start time that you desire.
Click the (Start Time) button to register this as the desired start time. Your
selection will be displayed on the screen.
Next, select the desired end time by once again clicking on the time and keying in,
or moving the marker as before.
When your desired end time is displayed, click the (End Time) button to register
this.
Your selected end time will be displayed on the screen.
The system will calculate and display the estimated file size of the video clip for this
selected time period.
Click the (Export) button to proceed.
You may also click the (Cancel) button in order to go back and select a different
time period.
To Next Page
Loading...