Gatekeeper Y58 - Page 83

Y58 User Manual & Install Guide
83 of 148
These configuration values are server specific. If
you have more than one centre server set up,
you will need to select each in turn and
configure them separately.
Add – this button allows you to add a new
centre server name and configure its settings.
Delete – this button deletes the selected centre
server and its associated configuration settings.
Notes:
- You may add up to 5 centre servers.
- Server 1 is the default centre server and it
cannot be deleted.
DEFAULT SETTINGS:
Server 1
ON
Checkbox – selecting this will mark the selected
server as active.
DEFAULT SETTINGS:
Checkbox – Selected
Protocol Type
Drop-down list to select the protocol type
option for the selected centre server:
N9M
Notes:
- Currently, this is the only option available.
DEFAULT SETTINGS:
N9M
Enable Network
Drop-down list to select the network mode
used to communicate with the selected centre
server:
Local
Wi-Fi
Auto Adaptation
DEFAULT SETTINGS:
Local